证据复核截至 。价格记录保留各自的观察日期和条件。查看来源方法与数据集
Hi-Light 航轮 G0
- 车型类别
- Gravel 砾石
- 资料状态
- 研究资料
- 轮胎空间
- 50 mm
- 轮胎空间依据
- Current exact manufacturer maximum; an independent current retailer lists 45C, so the manufacturer value controls
- 车架材料
- Titanium frame with 3D-printed/integrated junction details and carbon fork
- Frame_weight_status
- No exact frame-only weight with size, finish and included-hardware basis found after 50 registered source areas
本页提供中文导航、概要与规格标签；型号、来源标题及尚未逐条翻译的详细研究和报价备注保留原文。请结合原始来源核对具体配置与条件。
50 mm tire clearance
Hi-Light 航轮 G0 的研究资料。轮胎空间记录 50 mm。价格观察日期为 2026-09-01；不是实时结算报价。具体配置、测量口径与待确认问题见下方；未知信息不代表产品质量差。
原始研究说明（英文）
A current exact titanium gravel platform with 3D-printed/integrated junctions, carbon fork, T47 and qualitative head-section rigidity evidence.
The displayed Est. ¥21,900 estimate adds the adjustable ¥6,000 build allowance to the recorded ¥15,900 frame price.
规格与证据
- 产品类型
- 车架装车估算
- 车型类别
- Gravel 砾石
- 证据成熟度
- 研究资料
- 价格依据
- Frame ¥15,900 · 官方价格 · 2026-09-01
- 轮胎空间
- 50 mm
- 轮胎空间依据
- Current exact manufacturer maximum; an independent current retailer lists 45C, so the manufacturer value controls
- 车架材料
- Titanium frame with 3D-printed/integrated junction details and carbon fork
- Frame_weight_status
- No exact frame-only weight with size, finish and included-hardware basis found after 50 registered source areas
- 刚性证据
- A current exact G0 dealer/owner-bike review says the 3D-printed head section contributes to increased rigidity; qualitative construction evidence without a numeric magnitude
- 制造信息
- Titanium frame with 3D-printed/integrated head, seat-junction and dropout details; carbon fork
Current exact manufacturer evidence lists CNY 15,900 and 50C. Current exact retailer and dealer evidence establish titanium/carbon construction and qualitative 3D-printed-head rigidity context; no frame-only weight is published.
购买参考
Before buying, verify Frame-only weight with exact size, finish and included-hardware basis; China purchase checkout, domestic warranty entity and after-sales terms; Rights-cleared exact product image.
About Hi-Light
价格记录与来源
这些来源支持本车型页面；各项结论保留其引用来源对应的置信程度。
Current exact manufacturer page lists CNY 15,900 and publishes a 700x50C maximum. An independent current retailer lists 700x45C; the manufacturer maximum controls and the conflict is retained in the candidate note.
The current exact G0 listing identifies a titanium frame, carbon fork, internal routing and included headset, seat clamp and thru axles. Its 45C maximum conflicts with the current manufacturer 50C value and is not promoted.
The current exact G0 review distinguishes G0 from G0 Pro and says the 3D-printed head section contributes to increased rigidity. This is qualitative construction evidence, not a measured stiffness magnitude.