证据复核截至 。价格记录保留各自的观察日期和条件。查看来源方法与数据集
TSB / Titan Super Bond 泰世邦 PIONEER ONE
- 车型类别
- 公路
- 资料状态
- 研究资料
- 轮胎空间
- 32 mm
- 轮胎空间依据
- Current exact LAGET manufacturer maximum
- 车架重量
- 1,350 g
- 车架重量口径
- Manufacturer claim for size S; included-hardware basis unpublished
本页提供中文导航、概要与规格标签；型号、来源标题及尚未逐条翻译的详细研究和报价备注保留原文。请结合原始来源核对具体配置与条件。
1,350 g frame with 32 mm tire clearance
TSB / Titan Super Bond 泰世邦 PIONEER ONE 的研究资料。车架重量记录 1350 g；轮胎空间记录 32 mm。价格观察日期为 2026-08-17；不是实时结算报价。具体配置、测量口径与待确认问题见下方；未知信息不代表产品质量差。
原始研究说明（英文）
Factory-backed Chinese additive-manufacturing story; printed parts passed ISO 4210 dynamic-fatigue testing in the BLT case study.
The displayed Est. ¥27,900 estimate adds the adjustable ¥6,000 build allowance to the recorded ¥21,900 frame price.
规格与证据
- 产品类型
- 车架装车估算
- 车型类别
- 公路
- 证据成熟度
- 研究资料
- 价格依据
- Frame ¥21,900 · 官方价格 · 2026-08-17
- 轮胎空间
- 32 mm
- 轮胎空间依据
- Current exact LAGET manufacturer maximum
- 车架重量
- 1,350 g
- 车架重量口径
- Manufacturer claim for size S; included-hardware basis unpublished
- 车架材料
- 3D-printed Ti 3Al-2.5V titanium frame with carbon fork
- Frame_stiffness_status
- No exact-model numeric or sufficiently specific independent frame-stiffness result found after 50 registered source areas
- 制造信息
- 3D-printed titanium-joint frame
The TSB page lists PIONEER ONE under its LAGET bike section and identifies a Ti 3Al-2.5V 3D-printed frame. The exact current LAGET page publishes 1.35 kg in size S, 700x32C maximum and a carbon fork. No exact stiffness result was found.
购买参考
Before buying, verify Exact included package and current dealer stock; Confirm distributor warranty terms for a mainland purchase; Exact-model stiffness evidence; Rights-cleared exact product image.
About TSB / Titan Super Bond
价格记录与来源
这些来源支持本车型页面；各项结论保留其引用来源对应的置信程度。
The current TSB PIONEER ONE page identifies the product under its LAGET bike section as a Ti 3Al-2.5V 3D-printed titanium frame in XS-XL. The exact current LAGET page supplies the 1.35 kg size-S reference and 700x32C maximum.
The current exact manufacturer page lists CNY 21,900, a 1.35 kg size-S 3D-printed titanium frame, carbon fork and a 700x32C maximum. It publishes no exact-model stiffness or deflection result.
Official page lists a Beijing authorized dealer and manufacturer contacts for the Pioneer One purchase/support route. Stock varies.
Exact authorized-distributor listing states lifetime titanium-frame, three-year titanium-component and one-year carbon-component warranty. Mainland-China applicability requires confirmation.